How to install Stock ROM on Tecno Boom J5

These are the instructions to flash or install Stock ROM (firmware) on the Tecno Boom J5 Smartphone using the SP Flash Tool.

Caution: Installing or Flashing the Stock ROM on the Tecno Boom J5 smartphone will wipe or delete the data. Therefore, We recommend you to take a backup of your data before following the tutorial below.

Install Stock ROM (firmware) on Tecno Boom J5

To install the Stock ROM on Tecno Boom J5 device, follow the below steps:

Prerequisite

  1. Your device should have at least 50% battery.
  2. Take a Backup (if the device is in working condition).
  3. Download MediaTek Driver
  4. Download SP Flash Tool (latest)
  5. Download Tecno Boom J5 Stock ROM

How to install Stock ROM on Tecno Boom J5

Assuming you have downloaded all the three files on the computer, i.e., MediaTek Driver, SP Flash Tool, and the Stock ROM (firmware). Let’s begin with extracting all the three zip files so that you can get these three folders:

MTK Files

  1. Open MediaTek Driver Folder (i.e Folder 1):
  2. MTK Driver

  3. In MediaTek Driver Folder, Open Install Drivers.bat file to launch the driver setup window:
  4. Mediatek Driver Setup

  5. Once the MediaTek Driver Setup window is launched, Press any key (from keyboard) to install the driver:
  6. Mediatek Driver Setup Open

    Once the installation process is completed, Press any key (from keyboard) to exit the setup window.

    Mediatek Driver Setup Done

  7. Open the SP Flash Tool Folder (i.e Folder 2):
  8. MTK SP Flash Tool

  9. In SP Flash Tool folder, double-click on the flash_tool.exe to launch it.
  10. SP Flash Tool Open

  11. Once SP Flash Tool is launched, Click on the Scatter Loading button:
  12. SP Flash Tool Scatter Loading

  13. Locate the Scatter File (.txt) from the Firmware Folder (i.e Folder 3):
  14. MTK Firmware Folder

    MT6580 Scatter Select

  15. Once you have successfully Added the Firmware on SP Flash Tool, you will be able to see the similar screen:
  16. MT6580 Scatter Loaded

  17. Now, Untick the preloader option (flashing preloader may brick the device):
  18. MT6580 Untick Preloader

  19. Click on the Download Button:
  20. MT6580 Download

  21. Connect your Device to the Computer (make sure it is Turn Off/Power Off).
  22. connect mobile computer

  23. Once your device is connected to the computer, SP Flash Tool will automatically begin the installation Process.
  24. Suppose the installation doesn’t begin immediately after connecting the device to the computer; in that situation, you may need to Press the Boot Key of your device (boot key vary per device). In most of the MediaTek devices, Volume Down or UP is the boot key.

    MT6580 Flashing

  25. Once the installation process is completed, you will be able to see the Green Tick at the End.
  26. MT6580 Success

  27. Close the SP Flash Tool and disconnect the device from the computer and restart it.
  28. disconnect mobile computer

    Congratulations! Now you can use your device without facing any software related issue.

Readme Once:

[*] Write or Fix IMEI: If you want to Write or Fix IMEI, then head over to How to Write or Fix IMEI on Tecno Boom J5 page.

[*] Hard Reset: If you want to Reset your Mobile Device, then head over to How to Hard Reset Tecno Boom J5 page.

[*] Fact: ROM is the operating system of the Mobile device, which can also be termed as Firmware and Flash File.

[*] Credits: Big thanks to the MediaTek for their SP Flash Tool. Without using the SP Flash Tool, the above tutorial was not possible.

Load Comments
Made with ♥ in Nigeria | Hosted on BlueHost

Copyright © 2016-2020 Naija ROM. All Rights Reserved.